Healing for every body

Where to Buy *
Where to Buy *
  • Image showing a packshot of Cutimed® Siltec® PLUS
  • Image showing Cutimed® Siltec® PLUS from the top
  • Product facts visualizing low to high-superficial-sloughy- granulating- epithelializing

Cutimed® Siltec® Plus

is a silicone coated, sterile, absorbent polyurethane foam dressing with superabsorbent stripes to additionally absorb and lock wound exudate. The wound contact surface allows adherence to the periwound skin but not to the moist wound bed or newly formed epithelial tissue. The “PLUS” stands for higher adhesion within the Siltec® product range.
  • Gentle with high adherence

  • Water-repellent and breathable backing

  • Can be cut to size

Intended Purpose

Indications: Cutimed® Siltec® PLUS is intended for the treatment of exudating wounds with low to high exudate levels such as venous leg ulcers, pressure injuries, diabetic foot ulcers, surgical incisions, skin grafts and donor sites, lacerations or abrasions.

Wear time: Cutimed® Siltec® PLUS can remain in place for up to 7 days, depending on wound conditions and saturation of wound dressing. It is recommended to change the dressing every 24 hours initially, moving to less frequent changes as necessary. 

Learn about the product and how to apply it

Learn about the products's mode of action

Product benefits

Symbol of a feather to visualize that the product is gentle

Gentle with high adherence

The perforated silicone wound contact layer - with higher adherence than Cutimed® Siltec® - prevents adherence to newly formed tissue, protects wound margins and ensures atraumatic, pain-reduced dressing changes.1, 2, 3, 4, 5
Symbol of a dressing and water droplets that do not reach its backing to visualize the water-repellant feature

Water-repellent and breathable backing

The outer film is bacteria proof, water-repellent and ensures proper fluid evaporation for changing stages of saturation.
Symbol of a scissor to visualize that the product can be cut to size if needed

Can be cut to size

The dressing can also be cut to size, making it as comfortable for the patient as possible. 

Symbol of two water droplets to visualize the exudate-handling capacity of the product

Reliable exudate management

The vertical absorption makes sure exudate is taken up reliable and kept inside the dressing – even under compression. Superabsorbent stripes additionally support the absorption capacity.1, 2
Symbol of a hand holding a heart with a feather to visualize that the product is skin-friendly

Skin-friendly

The dressing has a low potential for skin irritations and allergies.1

Product facts

Superficial

Sloughy

Granulating

Epithelialising

Low to high

Secondary dressing needed

How to use

Three images to visualize how to select the right size and apply Cutimed Siltec Plus
1. Clean the wound and your hands according to good clinical practice. If you are unsure how to clean the wound appropriately, please contact your health care professional for further instructions.
2. Make sure, the surrounding skin is dry.
3. Choose an appropriate dressing size that covers the wound and overlaps the wound edges. (A)
4. Open the pouch and take out the dressing. Please ensure, that the pouch is not opened or damaged.
5. Remove protective film (B) and apply with the adherent side towards the wound. (C)
6. Avoid stretching the dressing.
7. Apply additional dressing fixation.
8.Cutimed® Siltec® PLUS may be used on infected wounds in addition to antimicrobial therapy under medical supervision.
9. If necessary, Cutimed® Siltec® PLUS can be used in combination with other dressings e.g. Cutimed® Sorbact® (in case of infected wounds) or hydrogel (for dry, necrotic wounds).
10. Cutimed® Siltec® PLUS can remain in place for up to 7 days, depending on wound conditions and saturation of wound dressing. It is recommended to change the dressing every 24 hours initially, moving to less frequent changes as necessary.
How to Remove
11. Carefully remove any additional dressing fixation and gently remove Cutimed® Siltec® PLUS from the wound and discard.
12. If required, cleanse the wound prior to application of a new dressing.

Product specifications

PRODUCT
REF
Dimensions
Pieces/box
Cutimed® Siltec® Plus 7328800 2 in x 2.5 in 10
Cutimed® Siltec® Plus 7328801 4 in x 4 in 10
Cutimed® Siltec® Plus 7328802 4 in x 8 in 10
Cutimed® Siltec® Plus 7328803 6 in x 6 in 10

Medical References

1 Seckam A., A multicentre, observational evaluation of the product characteristics of two absorbent foam dressings. Br J Nurs. Jun 27, 2019;28(12):S10-S17.
2 King B., A clinical evaluation of 20 patients when using a new absorbent silicone foam wound dressing: Cutimed Siltec B. Wounds UK. 2018; Vol 14. No 3.
3 Zimmermann S., In-vitro exudate management performance of a new hydropholic foam dressing range. Poster EWMA. 2017; Amsterdam.
4 Bateman, S.D., The challenge of skin tears and lacerations in an emergency environment. Wounds UK. 2014; 10. 94-99.
5 Bateman SD., 150 patient experiences with a soft silicone foam dressing. Br J Nurs. Jun 25-Jul 8, 2015;24(12):S16, S18-23.

Would you like to find out more about this product and how it can help your patients?

Contact us